- Home
- Manufacturing
- Electrical cabinets
Electrical cabinets
Metal, aluminium and stainless steel distribution cabinets, cable connection and metering & distribution cabinets, empty or fully pre-wired.
Metal distribution cabinets
Distribution cabinets are designed to house and mount a wide range of electrical equipment.
Depending on the material, the electrical cabinets we offer can be:
- Metal cabinets: standard range, from stock in standard sizes
- Aluminium cabinets: made to order
- Stainless steel cabinets: made to order
They are designed for surface mounting, flush mounting and free-standing installation on a base, and each is supplied with the necessary mounting kit.
Metal cabinets
Metal cabinets are made of cold-rolled steel sheet whose thickness depends on the cabinet size. They are protected by electrostatically applied textured polyester powder coating, which gives high resistance to environmental influences and an excellent appearance.
Two vertical profiles are welded to the inside of the cabinet door; they reinforce the door and are used for mounting equipment. A 2 mm galvanised steel mounting plate is included in the cabinet price.
- Standard degree of protection
- IP55, certified
- Cabinets taller than 600 mm
- also IP65, IP66
- Mounting plate
- galvanised, 2 mm
Standard cabinet sizes are listed in the price list. On request, we make cabinets to the required dimensions at very short notice.
We offer particularly favourable terms for fully pre-wired cabinets, with the equipment wired according to the documentation (single-line diagram) supplied by the customer or to our own design.
Cable connection cabinets (KPO)
Cable connection cabinets are used to connect buildings to the electricity grid.
We make them from 1 mm cold-rolled steel sheet and protect them with electrostatically applied textured polyester powder coating.
They are made in three sizes, selected according to the installed power of the building, i.e. the size of the NH fuse (160, 250 and 400 A), and the cross-section of the incoming and outgoing cables.
| Type | Dimensions (mm) | Incoming / outgoing cable |
|---|---|---|
| KPO 160 A | 275 × 350 × 135 | up to 70 / 50 mm² |
| KPO 250 A | 400 × 450 × 150 | up to 150 / 95 mm² |
| KPO 400 A | 400 × 600 × 150 | up to 150 / up to 150 mm² |
Cable entry is easy because the lower cover plate is removable and the bottom is open, with edges lined with protective rubber. In addition to the neutral busbar, the cabinets have an earthing busbar on the side.
They are available empty or with equipment (complete with base, neutral and protective earth busbars).
Metering and distribution cabinets (MRO)
Metering and distribution cabinets are designed to house electricity metering devices. They are recognisable by the windows in the door through which the meters are read. They consist of three sections: connection, metering and distribution.
We make them from cold-rolled steel sheet and protect them with electrostatically applied textured polyester powder coating.
They are made in several sizes and with different internal layouts, in line with the technical requirements of the responsible distribution system operator. We make cabinets for buildings of all types: residential buildings of all sizes, and metering cabinets for industrial and commercial buildings.
They can be surface-mounted or flush-mounted, empty or, on request, fully equipped.
Cabinet price list
Prices shown on the website are wholesale prices, excluding VAT. We grant discounts depending on the quantity ordered, the payment terms and the overall history of our cooperation.